| 239/530CAKW33 Spherical Roller Bearings | Weight:1.180 lb; R:8.701 in; B:10.406 in; No. of Tangs:19; E:9.570 in; Q:0.115 in; S:0.945 in; T:0.770 in; X:8.327 in; |
| 23240 E1A-K-MB1 Needle Aircraft Roller Bearings | Dimension J2 :16-3/4 in; Support Type:Four-Bolt Plummer Bl; Dimension K :3-3/4 in; Dimension H2:14.2 in; Cr - Dynamic Load Rating:95055 lbf; Cor - Static Load Rating:131675 lbf; Bearing Number:LSE503BX; Dimension H :6-5/16 in; Note:This product line wa; Dimension J1 :18-1/2 in; Dimension L :21-3/4 in; Bearing UPC:013992059130; Housing Width:6.5 in; Seal Type:High Temperature Pac; |
| HH924349V1/HH924310D Angular Contact Ball Bearings | Series Type:Light Series; Bearing Number:LSE207BR; Dimension N:6.571 in; Support Type:Round Flange; Dimension L:4.6 in; Dimension P:0.6 in; Bearing - Housing - Seal UPC:013992103475; Note:This product line wa; Maximum Speed:3940 rpm; Dimension V:0.1 in; Bolt Size:4 x M12; Cor - Static Load Rating:25853 lbf; Ca - Axial Load Rating:1213.95 lbf; Bearing - Housing - Seal:LSE207BRHHTPS; Dimension R:8.6 in; |
| LM121948DW Needle Aircraft Roller Bearings | d:1.2500 in; Design Units:Imperial; Series:3100; da - Cone Frontface Backing Diameter:1.56 in; db - Cone Backface Backing Diameter:1.57 in; G1 - Heat Generation Factor (Roller-Raceway)10:23.4; D:2.8593 in; e - ISO Factor8:0.33; T - Bearing Width to Flange:0.4375 in; Cone Part Number:3188; Cg - Geometry Factor11:0.0697; G2 - Heat Generation Factor (Rib-Roller End):8.76; Da - Cup Frontface Backing Diameter:2.74 in; |
| 29268M Needle Aircraft Roller Bearings | Limiting Speed - Grease:16,000 rpm; Configuration:Single Row; Radial Clearance:0.035 to 0.060 mm; db (max):22 mm; Bore Type:Cylindrical Bore; Db (max):34 mm; Da (max):35 mm; Enclosure:Open; Static Load Rating:7,950 N; da (min):22 mm; d:17 mm; ra (max):0.6 mm; ra1 (max):0.3 mm; r1:0.3 mm; Weight:0.080 kg; Dynamic Load Rating:12,600 N; db (min):19 mm; Db (min):34 mm; Fillet Radius/Chamfer:0.6 mm; Outside Ring Inside Diameter:33.9 mm; |
| 32044 XM-2TS-DM Needle Roller Bearings | Y - ISO Factor9:1.49; G2 - Heat Generation Factor (Rib-Roller End):201; R - Cone Backface To Clear Radius1:6.35 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:40600 lbf; Cone Part Number:EE275100; C1 - Dynamic Radial Rating (1 million revolutions)5:228000 lbf; Cup Part Number:275160; C - Cup Width:46.038 mm; Aa - Cage-Cone Backface Clearance:13.7 mm; C0 - Static Radial Rating:359000 lbf; |
| EE420801/421451CD Cylindrical Roller Bearings | Hole Diameter (do):5 mm; Configuration:Double Row; Da (max):213 mm; Roller Profile:Asymmetric; Axial Load Factor Y1:2.79; d:150 mm; B:56 mm; Dynamic Load Rating:640,000 N; Nr. of Holes:6; D:225 mm; Groove Width A:11 mm; Static Load Rating:791,000 N; Constant e:0.24; Limiting Speed - Oil:3,600 rpm; Weight:8.200 kg; Center Guidance:Fixed Inner Ring Rib; da (min):162 mm; ra (max):2 mm; Limiting Speed - Grease:2,700 rpm; |
| 305264D Needle Roller Bearings | Limiting Speed (Grease):5000 rpm; Da - Outer Ring Backing Diameter:216.100 mm; Bearing Width:28 mm; do - Ball Diameter:18.256250 mm; Limiting Speed (Oil):10000 rpm; Ce - Dynamic Radial Rating1:126000 N; D:230 mm; Full Timken Part Number:3MM9334WICRDUH; Ball Type:STEEL; Cage Type:CR - Phenolic Outer; d:170 mm; da - Inner Ring Backing Diameter:184.700 mm; Contact Angle:25 º; R - Inner Ring To Clear Radius2:2.0 mm; |
| No. | Brand | d | B | A | J | L | R | E | Q |
| LM 451349 DW/10/10 D | - | 3.3455 in | - | - | - | - | - | - | - |
| LM272249D/LM272210-LM272210D | - | 40 mm | 7 mm | - | - | - | - | - | - |
| HH924349/HH924310D | - | 75 mm | 37 mm | - | - | - | - | - | - |
| T1115 | - | - | - | - | - | - | - | - | - |
| 48290DGW/48220 | - | - | - | - | - | - | - | - | - |
| 24168 B.C3 | - | 3.0625 in | - | - | - | - | - | - | - |
| HM261049 | - | - | - | - | - | - | - | - | - |
| 23168 CCK/W33+OH 3168H | - | - | - | - | - | - | - | - | - |
| BT2B 332506/HAZ | - | - | - | - | - | - | - | - | - |
| HM259049 DGW/010/010D | - | - | - | - | - | - | - | - | - |
| L163149/1 | - | 1.3750 in | - | - | - | - | - | - | - |
| T1011 | - | - | - | 185.00 mm | 350.00 mm | - | - | - | - |
| LM241149NW/LM241110D | - | 160 mm | 80 mm | - | - | - | - | - | - |
| T511 | - | - | - | - | - | - | - | - | - |
| HH255149D/1 | - | - | - | - | - | - | - | - | - |
| EE350750/351687 | - | - | 2.0000 in | - | - | - | - | - | - |
| FCD8011241 | - | 15.1250 in | - | - | - | - | - | - | - |
| T811 X | - | - | - | - | - | - | - | - | - |
| LM 247748 D/710/710 D | - | - | - | - | - | - | - | - | - |
| 67986 DW/20/21 D | - | - | - | - | - | - | - | - | - |
LM272235/LM27221 Cam Follower And Track Roller Video
The plain bearing - function, types and applications
May 25, 2019 - Solid plain bearings: This is the classic plain bearing with oil or grease lubrication. It normally consists of a single bearing material. The plain
Plain bearing - Wikipedia
Plain bearings, in general, are the least expensive type of bearing. They are also compact and lightweight, and they have a high load-carrying capacity
Plain bearings | SKF
SKF plain bearings are a reliable, cost-efficient solution for applications with multi-directional, self-aligning movements. Find the spherical plain bearings, radial
All about Plain Bearings - Design World
Jan 22, 2015 - Plain bearings are the simplest form of bearing available as they have no moving parts. They are, quite often, simply a cylinder, though the
Plain bearings: What are they? | Bearing Tips
Jan 22, 2015 - Plain bearings are cylindrical sleeves that bear light to moderate radial loads. They slide radially or axially over shafts to allow rotary motion or
What are Bearings? What is a Plain Bearing? | GGB
Plain bearings, also referred to as bushes, bushings or sleeve bearings, are usually cylindrical in shape and contain no moving parts. Standard configurations
What are plain bearings and how do they work? – Blog CLR
Mar 29, 2018 - Plain bearings are mechanical components charged with bearing a load and allowing a sliding or rotational motion between two parts of a machine. Their main purpose is preventing wear of the points of support of the machine, which would take place if the shafts were to roll directly on the structure