| 294/5 Cam Follower And Track Roller | Cy (max):1.8 mm; b (min):1 mm; Configuration:Single Row; a (max):1.3 mm; Weight:0.027 kg; Static Load Rating:3,800 N; Snap Ring Outside Diameter:44.8 mm; r1:0.3 mm; da (min):32 mm; B:7 mm; Dynamic Load Rating:5,350 N; Limiting Speed - Grease:15,000 rpm; Bore Type:Cylindrical Bore; Da (max):40 mm; D1 (max):40.7 mm; Radial Clearance:0.013 to 0.028 mm; Limiting Speed - Oil:18,000 rpm; Dx (min):45.5 mm; |
| LM272235/LM27221 Cam Follower And Track Roller | C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:37500 lbf; Aa - Cage-Cone Backface Clearance:1.3 mm; G2 - Heat Generation Factor (Rib-Roller End):11.4; R - Cone Backface To Clear Radius3:1.520 mm; K - Factor8:1.56; Cage Type:Stamped Steel; Series:32208; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:16000 N; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9730 lbf; |
| EE420801/421451CD Thrust Roller Bearing | da - Cone Frontface Backing Diameter:9.8 in; C0 - Static Radial Rating:699000 lbf; a - Effective Center Location4:-1.1 in; db - Cone Backface Backing Diameter:10.2 in; Ab - Cage-Cone Frontface Clearance:0.16 in; B - Cone Width:4.4375 in; Series:H247500; Cg - Geometry Factor:0.164; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:195000 lbf; Aa - Cage-Cone Backface Clearance:0.37 in; |
| T411 Cylindrical Roller Bearings | Cup Part Number:LM11910; e - ISO Factor2:0.3; r - Cup Backface To Clear Radius1:0.050 in; C - Cup Width:0.4750 in; Series:LM11900; Da - Cup Frontface Backing Diameter:1.65 in; Db - Cup Backface Backing Diameter:1.56 in; Cg - Geometry Factor:0.0441; Y - ISO Factor3:2; Design Units:Imperial; D:1.7810 in; |
| M272647DW/10/10D Needle Aircraft Roller Bearings | Dimension G:2.700 in; Adapter Sleeve Axial Movement Min:0.018 in; Dimension M:1.4 in; Oil Lubrication - T Seal:3800 rpm; Post Install Int Radial Clearance Min:0.0015 in; Dimension S:2.32 in; Dimension C:2.95 in; Dimension J (Bolt Size):0.625 in; Full Timken Part Number:TAPH11K050SB; Dimension A:2.75 in; Locking Style:Tapered Adapter; Float:0.050 in; Pre Install Clearance Max:0.0037 in; Grease Lubrication - T Seal:3200 rpm; |
| 530897 Plain Bearings | D:75 mm; Snap Ring Width:1.7 mm; Cy (max):4.6 mm; Fillet Radius/Chamfer:1.1 mm; Radial Clearance:0.015 to 0.033 mm; Bore Type:Cylindrical Bore; Configuration:Single Row; Static Load Rating:16,200 N; Limiting Speed - Oil:11,000 rpm; Snap Ring Outside Diameter:81.6 mm; Enclosure:Single Shield with S; Da (max):68 mm; da (min):39 mm; Dynamic Load Rating:30,000 N; b (min):1.9 mm; ra (max):1 mm; d:32 mm; |
| FCDP150216715/HC/C4 Needle Roller Bearings | Dimension L:8.1 in; Dimension H:4.5 in; Bearing Number:MSE412BX; Cr - Dynamic Load Rating:118025 lbf; Bearing UPC:013992039392; Bolt Size:4 x M24; Shaft Size:4.75 in; Cor - Static Load Rating:157366 lbf; Dimension V:0.1 in; Dimension T:18.5 in; Series Type:Medium Series; Dimension P:1.0 in; Support Type:Round Flange; Dimension R:16.2 in; Bearing Type:Split Cylindrical Ex; Bearing - Housing - Seal UPC:013992039774; |
| 7330B MP Needle Aircraft Roller Bearings | Seal Type:Labyrinth; H2:32.0 mm; Locating Rings (width x OD):SR150X12.5; Seal:LO517/ 2-15/16; C1 Dynamic Load Rating:297; Jmax:268 mm; J:260.00 mm; Material :Cast Iron; H1:95.0 mm; L:320.00 mm; N1:28 mm; Adapter Sleeve1:HA317; Housing:SNT 517; A1:90 mm; C0 Static Load Rating:320; A2:143 mm; A:125.00 mm; Bearing:22217K; N:22 mm; Housing Mass:10.4 Kg; |
| No. | Brand | d | B | A | J | L | R | E | Q |
| HM 266449 DW/410/410 D | - | - | - | 120.00 mm | 260.00 mm | 315.00 mm | - | - | - |
| NU3184 | - | 85 mm | 41 mm | - | - | - | - | - | - |
| NNCF 5044 V/C3 | - | 190.000 mm | - | - | - | - | - | - | - |
| M667948/M667911 | - | 400 mm | 90 mm | - | - | - | - | - | - |
| T811 | - | - | - | - | - | - | - | 8.031 in | - |
| 67790 D/20/21 D | - | - | - | - | - | - | - | - | - |
| T16021 | - | - | - | - | - | - | - | - | - |
| EE231400/231976D | - | - | - | - | - | - | - | - | - |
| FCDP150216715/HC/C4 | - | - | - | - | - | - | - | - | - |
| HM259049 DGW/010/010D | - | - | - | - | - | - | - | - | - |
| FC689628 | - | - | - | - | - | - | - | - | - |
| LM 761649 DW/610/610 D | - | - | - | - | - | - | - | - | - |
| 3004244 | - | 40 mm | 23 mm | - | - | - | - | - | - |
| 230SM160MA | - | 2.1654 in | - | - | - | - | - | - | - |
| M 244249 D/210/210 D | - | - | - | - | - | - | - | - | - |
| H15002707A | - | - | - | - | - | - | - | - | - |
| M667947D/M667911 | - | 65 mm | 31 mm | - | - | - | - | - | - |
| HM262749DW/710/710D | - | - | 100 mm | - | - | - | - | - | - |
| T651 | - | - | - | - | - | - | - | - | - |
| 618/530MA | - | 600.000 mm | - | - | - | - | - | - | - |
| 67990/67220CD | - | - | - | - | - | - | - | - | - |
29432 E Cylindrical Roller Bearings Video
All about Plain Bearings - Design World
Jan 22, 2015 - Plain bearings are the simplest form of bearing available as they have no moving parts. They are, quite often, simply a cylinder, though the
Plain bearing - Wikipedia
Plain bearings, in general, are the least expensive type of bearing. They are also compact and lightweight, and they have a high load-carrying capacity
Plain bearings: What are they? | Bearing Tips
Jan 22, 2015 - Plain bearings are cylindrical sleeves that bear light to moderate radial loads. They slide radially or axially over shafts to allow rotary motion or
The plain bearing - function, types and applications
May 25, 2019 - Solid plain bearings: This is the classic plain bearing with oil or grease lubrication. It normally consists of a single bearing material. The plain
What are Bearings? What is a Plain Bearing? | GGB
Plain bearings, also referred to as bushes, bushings or sleeve bearings, are usually cylindrical in shape and contain no moving parts. Standard configurations
Plain bearings | SKF
SKF plain bearings are a reliable, cost-efficient solution for applications with multi-directional, self-aligning movements. Find the spherical plain bearings, radial
What are plain bearings and how do they work? – Blog CLR
Mar 29, 2018 - Plain bearings are mechanical components charged with bearing a load and allowing a sliding or rotational motion between two parts of a machine. Their main purpose is preventing wear of the points of support of the machine, which would take place if the shafts were to roll directly on the structure