| AMI UCNFL204CB Bearings | d:60 mm; C0:32.8 kN; L:195 mm; G:M6x1; S:14.9 mm; Z:73.1 mm; H3:135; Weight:4.88 kg; N:19mm; Recommended tightening torque for set screw:22 Nm; |
| AMI UCST207TCMZ2 Bearings | d1:65.4 mm; ra max:1.5 mm; Characteristic cage frequency, FTF:0.41 Hz; Da max:92 mm; Associated sleeve reference:H211; B:21 mm; da max:65.4 mm; Mass:0.6 kg; d:55 mm; Brand:SNR; |
| AMI UCF211 Flange Block Bearings | Z:27.5 mm; H2:126 mm; d:50.8 mm; N:M16; B:45.3 mm; C:43.55 kN; T min.:-20 °C; H:63.5 mm; E:25 mm; A1:34 mm; |
| AMI UCFC203C Flange Block Bearings | Rolling Element Material:Steel; Raceway Ring Shape:Needle Roller; Outer Ring Type:Flat; Outer Ring:With Outer Ring; RoHS:6; Specifications/Environment:Standard; Series:No Inner Wheel; Precision (JIS):Grade 0; B:45; |
| AMI KHP210-31 Bearings | SW:3 mm; B1:31 mm; N1:16 mm; A5:14.5 mm; N2:32 mm; A1:12 mm; s1:24.25 mm; Weight:0.85 kg; L2:10 mm; Z:63 mm; |
| AMI UCPX10-32 Pillow Block Bearings | Characteristic cage frequency, FTF:0.38 Hz; d:40 mm; Max operating temperature, Tmax:120 °C; Dynamic load, C:40.4 kN; Da max:82 mm; Characteristic outer ring frequency, BPF0:3.08 Hz; da max:54.7 mm; D1:77.1 mm; Mass:0.64 kg; rs min:1.5 mm; |
| AMI UEFLX10-31 Bearings | Dynamic load, C:6.8 kN; rs min:0.3 mm; Min operating temperature, Tmin:-25 °C; Static load, C0:3.35 kN; Characteristic inner ring frequency, BPFI:4.86 Hz; Fatigue limit load, Cu:0.15 kN; Characteristic rolling element frequency, BSF:4.47 Hz; d:17 mm; Da max:33 mm; Nlim (grease):14,000 rpm; |
| AMI UCFL202C Flange Block Bearings | A:45.8 mm; N:18mm; e:28 mm; d:55.56 mm; C0:29.2 kN; L:134 mm; Weight:3.2 kg; Designation of bearing:UC211-35G2L3; A2:61.4 mm; C:43.55 kN; |
| AMI 208OCB Bearings | L:140 mm; A:50 mm; G:M6x1; C:14 kN; T max.:100 °C; N1:19 mm; L1:50 mm; Designation of bearing:US205-15G2T04; H2:114 mm; Weight:1.18 kg; |
| AMI UCST209-27TCMZ2 Bearings | r:2; SW:5.56 mm; G:7/16-20UNF; T min.:-40 °C; Recommended tightening torque for set screw:27.1 Nm; m:12 mm; C0:49.5 kN; S:33.3 mm; B:77.8 mm; D:130 mm; |
| AMI UCP201-8C4HR5 Pillow Block Bearings | h:50 mm; a:235 mm; initial grease quantity:46 Volume_cmc; A3:40 mm; Material of Housing:grey cast; A1:30 mm; D:72 mm; m:150 mm; A2:20 mm; Cover bolts:M6x20; |
| AMI UCST202C Bearings | Unit Body Material:Cast Iron; B:70; RoHS:6; Surface Treatment:No; Stroke:No; Unit, Type:Insert Bearing Unit; Basic Load Rating, Dynamic Rating(N):12800; Bearing Unit, Type:Pillow Type; Diameter series symbol:Used for Light load; Accessory:No Cover; |
| AMI UC208C4HR23 Bearings | Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):15; Shape:Flange Type; Flange O.D. H(φ):57; RoHS:6; Flange Shape:Square Type; Holder Surface Treatment:Clear Anodize; Bearing Retained:No; Type:Bearings with Housin; Seals:ZZ (Double Shield); |
| AMI UCT201CE Take Up Unit Bearings | Type:Bearings with Housin; Shape:T-Shaped; C Chamfered:Not Provided; Height H(mm):40 ～ 80; Seals:DD (Contact Rubber S; Number of Bearings:Single; Bearing Part Number:6906; Bearing Used:Deep Groove Ball Bea; Width T(mm):16; Bearing Material:[Steel] Steel; |