| No. | Brand | a | K | B | d | b | A | L | H |
| 4460 | INA | - | - | - | - | - | - | - | - |
| GE60-SW | INA | - | - | - | 170 mm | - | - | - | 55 mm |
| GRRY30-VA | INA | - | - | - | 420 mm | - | - | - | - |
| 4116-AW | INA | - | 12 mm | - | - | 22.3 mm | - | - | - |
| AXS115129 | INA | - | - | 55.00 mm | 95.000 mm | - | - | - | - |
| 2004 | INA | - | - | 33.00 mm | 130.000 mm | - | - | - | - |
| SCH1414-PP | INA | - | - | 93.00 mm | - | - | - | - | - |
| KTNOS 16 C-PP-AS | INA | - | - | - | 50 mm | - | - | - | - |
| GIHRK 60 DO | INA | - | - | 10.5 mm | 8 mm | - | - | - | - |
| F-204040.1 | INA | - | - | 18 mm | - | - | - | - | - |
| NKS24 | INA | - | - | 66.00 mm | 65.000 mm | - | - | - | - |
| PCJT1-1/2 | INA | - | - | 44.40 mm | 80.000 mm | - | - | - | - |
| GE28-SX | INA | - | - | - | - | - | - | - | - |
| TCJ35-N | INA | - | - | 140 mm | 380 mm | - | - | - | - |
| GIHNRK 20 LO | INA | - | - | - | - | - | - | - | - |
| GIKL 20 PW | INA | - | - | - | - | - | 175 mm | - | - |
| GIHN-K 32 LO | INA | - | - | 20.00 mm | 30.000 mm | - | - | - | - |
| BF7028 | INA | - | - | 46.00 mm | 280.000 mm | - | - | - | - |
| EGW38-E40 | INA | - | - | 42.00 mm | 25.000 mm | - | - | - | - |
| ZARN60120-TV | INA | - | - | 11.00 mm | 10.000 mm | - | - | - | - |
| KS30-PP | INA | - | - | 87.30 mm | 80.000 mm | - | - | - | - |
| GE420-DO | INA | - | - | - | - | - | - | - | - |
| KGSNG30-PP-AS | INA | - | - | - | - | - | - | - | - |
| GIR 80 DO-2RS | INA | - | - | - | - | - | - | - | - |
| INA GE28-SX plain bearings | Initial grease fill:793.8 g; ba:69.85 mm; R2:33.337 mm; Ca:89.789 mm; Bearing:23038 CCK/W33; Mass pillow block:132 kg; Pa:42.9 kN; P90°:207 kN; H1:169.875 mm; RG:3/4 NPT; |
| INA GE420-DO plain bearings | r1,2 min.:4 mm; B1:172 mm; Da max.:423 mm; Reference speed:1100 r/min; G1:26 mm; Limiting speed:1500 r/min; ra max.:3 mm; da max.:341 mm; Ca min.:4.1 mm; D:440 mm; |
| INA PCJT1-1/2 bearing units | Oil Speed Rating n2:3800 rpm; Sealed Speed Rating n3:2800 rpm; Accessories:No Shield, no Seal,; B:44.40 mm; Basic Static Radial Load Rating Co:160000 N; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:128000 N; d:80.000 mm; Fillet Radius ra:2.00 mm; D:140.0000 mm; |
| INA NK70/35-XL needle roller bearings | Basic Static Radial Load Rating Co:2520 lbf; Insert Bearing IB:ZMaRC; Dimension A1:1.2813 in; Dimension L:4.2500 in; Weight W:2.65 lb; Distance J:3.2500 in; Diameter N:0.5000 in; Dimension DA:3.6875 in; Shaft Diameter D:1 3/16 in; Height T:1.6563 in; |
| INA KTNOS 16 C-PP-AS linear bearings | d2 max.:114 mm; d:50 mm; dk:66 mm; G:M 52x3; r1 min.:0.6 mm; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:245 kN; α:6 °; l2 max.:254 mm; h:195 mm; |
| INA KGSNG30-PP-AS linear bearings | Stabilizing ring:SR-20-17; da:85.725 mm; N1:25.4 mm; P90°:81.4 kN; Cap bolt recommended tightening torque:203.4 N·m; h:42.069 mm; PG:1/4 NPT; P180°:55.6 kN; A1:111.125 mm; Housing:SAF 520; |
| INA GRRY30-VA bearing units | B2:43 mm; B1:23 mm; Mass angle ring:10 kg; d:420 mm; r3,4 min.:5 mm; d1 ≈:490 mm; |
| 40 mm x 105 mm x 27 mm INA GE 40 AX plain bearings | D:35 mm; a:12 mm; Static (Cor):4.875 kN; Dynamic (Cr):9.580 kN; Grease:17 000 min-1; B:11 mm; Oil:20 000 min-1; r1s (min):0.3 mm; Pu:0.222 kN; rs (min):0.6 mm; Size (mm):40 mm x 105 mm x 27 mm ; |
| INA F-204040.1 angular contact ball bearings | Basic dynamic load rating C:16.3 kN; Da max.:89 mm; B:18 mm; Number of balls z:25; Db max.:90.8 mm; Calculation factor e:0.68; Mass bearing:0.42 kg; Reference grease quantity Gref:5.3 cm³; Preload class A GA:150 N; Preload class C GC:870 N; |
| INA KBO20-PP-AS linear bearings | H2:32 mm; H:177 mm; Da:140 mm; A1:90 mm; Q180°:110 kN; P150°:175 kN; P55°:430 kN; P120°:190 kN; L:315 mm; P90°:260 kN; |
| INA TCJ35-N bearing units | ra max.:3 mm; r1,2 min.:4 mm; Basic dynamic load rating C:2380 kN; d:380 mm; Limiting speed:630 r/min; d1 ≈:430 mm; Basic static load rating C0:5700 kN; da min.:398 mm; Fatigue load limit Pu:500 kN; B:140 mm; |
| INA 4116-AW thrust ball bearings | Da max.:1716 mm; r1,2 min.:9.5 mm; Basic dynamic load rating C:21256 kN; b:22.3 mm; da min.:1284 mm; d2 ≈:1415 mm; ra max.:8 mm; K:12 mm; Limiting speed:240 r/min; D:1750 mm; |
| INA KS30-PP linear bearings | Grease Speed Rating n1:2000 rpm; Oil Speed Rating n2:3000 rpm; d:80.000 mm; B:87.30 mm; Basic Dynamic Radial Load Rating C:229000 N; Fillet Radius ra:2.50 mm; D:200.0000 mm; Basic Static Radial Load Rating Co:216000 N; |
| 20 mm x 35 mm x 20 mm INA GIHNRK 20 LO plain bearings | Mass housing:339 kg; Pa:1800 kN; Appropriate attachment bolt, rec. tightening torque:2280 N·m; H2:115 mm; J6:820 mm; Q120°:2860 kN; P0°:5400 kN; Ca:196 mm; bb:144 mm; Oil seal:TSD 3164 U; Size (mm):20 mm x 35 mm x 20 mm ; |
INA AXS115129 Bearing Factory Direct Supply Axial angular
INA AXS115129 Bearing.Top Bearing company specializes in selling INA AXS115129 bearings, INA AXS115129 bearing related information: Model:
Bearing AXS115129 (INA) | Size and Specification | Bearings
Axial angular contact roller bearings AXS115129. Bearing number : AXS115129. Size (mm) : 115x129x5. Brand : INA. Bore Diameter (mm) : 115. Outer Diameter
Axial angular contact roller bearings - AXS - medias - Schaeffler
AXS115129, 115, 129, 5, Download CAD drawing, Mounting information/user manuals, Send to shopping basket. AXS120134, 120, 134, 6, Download CAD
Schaeffler Technologies AG & Co. KG - Free CAD models
Items 1 - 10 of 15 - Part number, AXS115129. Selection, AXS115129 ... KG The Schaeffler Group (with the brands INA and FAG) develops and manufactures
Axial angular contact roller bearings - AXS115129 - medias
This function determines appropriate INA and FAG bearings based on ... Load CAD files for AXS115129 ... Download AXS115129 (TracePartsOnline.net)
Original INA AXS115129 Bearings, Thrust Roller Bearing
Original INA AXS115129 bearing, 115x129x5. Best Price. Axial angular contact roller bearings AXS115129. Bearing number : AXS115129; Size (mm) :
INA AXS115129 thrust roller bearings Video