| No. | Brand | a | K | B | d | b | A | L | H |
| KGSNG30-PP-AS | INA | - | - | - | - | - | - | - | - |
| PME25-N | INA | - | - | 132 mm | 190 mm | - | - | - | - |
| GIHRK 60 DO | INA | - | - | 10.5 mm | 8 mm | - | - | - | - |
| SCH1414-PP | INA | - | - | 93.00 mm | - | - | - | - | - |
| K110X117X24 | INA | 10.529 mm | - | 14.732 mm | - | - | - | - | - |
| GIKL 20 PW | INA | - | - | - | - | - | 175 mm | - | - |
| 4460 | INA | - | - | - | - | - | - | - | - |
| K43X48X17 | INA | - | - | 120 mm | 170 mm | - | - | - | - |
| EGW38-E40 | INA | - | - | 42.00 mm | 25.000 mm | - | - | - | - |
| 2004 | INA | - | - | 33.00 mm | 130.000 mm | - | - | - | - |
| GE28-SX | INA | - | - | - | - | - | - | - | - |
| GIHNRK 20 LO | INA | - | - | - | - | - | - | - | - |
| NKS24 | INA | - | - | 66.00 mm | 65.000 mm | - | - | - | - |
| F-204040.1 | INA | - | - | 18 mm | - | - | - | - | - |
| BF7028 | INA | - | - | 46.00 mm | 280.000 mm | - | - | - | - |
| 4132-AW | INA | - | - | 38.10 mm | 60.000 mm | - | - | - | - |
| GE60-SW | INA | - | - | - | 170 mm | - | - | - | 55 mm |
| ZARN60120-TV | INA | - | - | 11.00 mm | 10.000 mm | - | - | - | - |
| GRRY30-VA | INA | - | - | - | 420 mm | - | - | - | - |
| KBO20-PP-AS | INA | - | - | - | - | - | - | 315 mm | 177 mm |
| GE420-DO | INA | - | - | - | - | - | - | - | - |
| INA KS30-PP linear bearings | Grease Speed Rating n1:2000 rpm; Oil Speed Rating n2:3000 rpm; d:80.000 mm; B:87.30 mm; Basic Dynamic Radial Load Rating C:229000 N; Fillet Radius ra:2.50 mm; D:200.0000 mm; Basic Static Radial Load Rating Co:216000 N; |
| 20 mm x 35 mm x 20 mm INA GIHNRK 20 LO plain bearings | Mass housing:339 kg; Pa:1800 kN; Appropriate attachment bolt, rec. tightening torque:2280 N·m; H2:115 mm; J6:820 mm; Q120°:2860 kN; P0°:5400 kN; Ca:196 mm; bb:144 mm; Oil seal:TSD 3164 U; Size (mm):20 mm x 35 mm x 20 mm ; |
| INA GE60-SW plain bearings | Oil:1 100 min-1; d:170 mm; Pu:28.480 kN; D1:173 mm; rs (min):1.5 mm; static Cor:897.000 kN; H:55 mm; d1:237 mm; dynamic Cr:300.670 kN; D:240 mm; |
| INA KTNOS 16 C-PP-AS linear bearings | d2 max.:114 mm; d:50 mm; dk:66 mm; G:M 52x3; r1 min.:0.6 mm; Specific dynamic load factor K:100 N/mm²; Basic static load rating C0:245 kN; α:6 °; l2 max.:254 mm; h:195 mm; |
| INA NKS24 needle roller bearings | D:140.0000 mm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:3200 rpm; Basic Static Radial Load Rating Co:160000 N; Oil Speed Rating n2:4300 rpm; d:65.000 mm; Basic Dynamic Radial Load Rating C:174000 N; B:66.00 mm; |
| INA GRRY30-VA bearing units | B2:43 mm; B1:23 mm; Mass angle ring:10 kg; d:420 mm; r3,4 min.:5 mm; d1 ≈:490 mm; |
| 20 mm x 40 mm x 25 mm INA GIKL 20 PW plain bearings | db:110 mm; A:175 mm; Cap bolt, size:M 20x100; End cover:ASNH 522-619 R; H1:125 mm; Ca:80 mm; Oil level, min.:42 mm; P150°:275 kN; P120°:310 kN; Q150°:360 kN; Size (mm):20 mm x 40 mm x 25 mm ; |
| INA TCJ35-N bearing units | ra max.:3 mm; r1,2 min.:4 mm; Basic dynamic load rating C:2380 kN; d:380 mm; Limiting speed:630 r/min; d1 ≈:430 mm; Basic static load rating C0:5700 kN; da min.:398 mm; Fatigue load limit Pu:500 kN; B:140 mm; |
| INA 4460 thrust ball bearings | S:4.763 mm; Ca:101.803 mm; da:174.625 mm; Mass pillow block:223 kg; H2:79.375 mm; PG:1/4 NPT; Bearing limiting speed:2400 r/min; Bearing:22238 CCK/W33; Adapter sleeve assembly:SNW 38x6.7/8; Stabilizing ring:SR-38-32; |
| INA NK70/35-XL needle roller bearings | Basic Static Radial Load Rating Co:2520 lbf; Insert Bearing IB:ZMaRC; Dimension A1:1.2813 in; Dimension L:4.2500 in; Weight W:2.65 lb; Distance J:3.2500 in; Diameter N:0.5000 in; Dimension DA:3.6875 in; Shaft Diameter D:1 3/16 in; Height T:1.6563 in; |
| INA PCJT1-1/2 bearing units | Oil Speed Rating n2:3800 rpm; Sealed Speed Rating n3:2800 rpm; Accessories:No Shield, no Seal,; B:44.40 mm; Basic Static Radial Load Rating Co:160000 N; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:128000 N; d:80.000 mm; Fillet Radius ra:2.00 mm; D:140.0000 mm; |
| INA KGSNG30-PP-AS linear bearings | Stabilizing ring:SR-20-17; da:85.725 mm; N1:25.4 mm; P90°:81.4 kN; Cap bolt recommended tightening torque:203.4 N·m; h:42.069 mm; PG:1/4 NPT; P180°:55.6 kN; A1:111.125 mm; Housing:SAF 520; |
| INA 4116-AW thrust ball bearings | Da max.:1716 mm; r1,2 min.:9.5 mm; Basic dynamic load rating C:21256 kN; b:22.3 mm; da min.:1284 mm; d2 ≈:1415 mm; ra max.:8 mm; K:12 mm; Limiting speed:240 r/min; D:1750 mm; |
| 40 mm x 105 mm x 27 mm INA GE 40 AX plain bearings | D:35 mm; a:12 mm; Static (Cor):4.875 kN; Dynamic (Cr):9.580 kN; Grease:17 000 min-1; B:11 mm; Oil:20 000 min-1; r1s (min):0.3 mm; Pu:0.222 kN; rs (min):0.6 mm; Size (mm):40 mm x 105 mm x 27 mm ; |
GE 28 SX | Online Catalog | Bearings | Products | NOC
Other bearings. Thrust and angular contact spherical plain bearings. Complete. INA GE 28 SX, GE-28-SX, GE28SX, GE28SX
Bearing GE28-SX (INA) | Size and Specification | Bearings Online
Spherical plain bearing GE28-SX. Bearing number : GE28-SX. Size (mm) : 28x52x15. Brand : INA. Bore Diameter (mm) : 28. Outer Diameter (mm) : 52
Angular contact spherical plain bearings - GE..-SX - medias
SX. Angular contact spherical plain bearings requiring maintenance, to DIN ISO 12 ... GE28-SX, 28, 52, 16, Download CAD drawing · Mounting information/user
GE28-SX-F7 INA • ABF Store
GE28-SX-F7 INA available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
INA GE28SX Elges Angular Contact Spherical Plain Bearing
Bearing part: GE28SX ,Brand:INA ,Bearing type: Elges Angular Contact Spherical Plain Bearing,Dimension:28x52x15mm,Weight:0.17kg, we supply INA
INA GE28-SX plain bearings | 28x52x16mm - Nodes bearing
Nodes bearings have INA GE28-SX bearings in stock, Angular contact spherical plain bearings, GE28-SX bearings dimensions: 28mm x 52mm x 16mm, Cr:
INA GE28-SX plain bearings Video