| No. | Brand | a | K | B | d | b | A | L | H |
| KTNOS 16 C-PP-AS | INA | - | - | - | 50 mm | - | - | - | - |
| EGW38-E40 | INA | - | - | 42.00 mm | 25.000 mm | - | - | - | - |
| ZARN60120-TV | INA | - | - | 11.00 mm | 10.000 mm | - | - | - | - |
| K110X117X24 | INA | 10.529 mm | - | 14.732 mm | - | - | - | - | - |
| 2004 | INA | - | - | 33.00 mm | 130.000 mm | - | - | - | - |
| KBO20-PP-AS | INA | - | - | - | - | - | - | 315 mm | 177 mm |
| PCJT1-1/2 | INA | - | - | 44.40 mm | 80.000 mm | - | - | - | - |
| GE420-DO | INA | - | - | - | - | - | - | - | - |
| GIR 80 DO-2RS | INA | - | - | - | - | - | - | - | - |
| 4460 | INA | - | - | - | - | - | - | - | - |
| GE60-SW | INA | - | - | - | 170 mm | - | - | - | 55 mm |
| GIHRK 60 DO | INA | - | - | 10.5 mm | 8 mm | - | - | - | - |
| K43X48X17 | INA | - | - | 120 mm | 170 mm | - | - | - | - |
| GE 40 AX | INA | 12 mm | - | 11 mm | - | - | - | - | - |
| F-204040.1 | INA | - | - | 18 mm | - | - | - | - | - |
| NKS24 | INA | - | - | 66.00 mm | 65.000 mm | - | - | - | - |
| GRRY30-VA | INA | - | - | - | 420 mm | - | - | - | - |
| SCH1414-PP | INA | - | - | 93.00 mm | - | - | - | - | - |
| TCJ35-N | INA | - | - | 140 mm | 380 mm | - | - | - | - |
| 4132-AW | INA | - | - | 38.10 mm | 60.000 mm | - | - | - | - |
| PME25-N | INA | - | - | 132 mm | 190 mm | - | - | - | - |
| BF7028 | INA | - | - | 46.00 mm | 280.000 mm | - | - | - | - |
| NK70/35-XL | INA | - | - | - | - | - | - | - | - |
| KGSNG30-PP-AS | INA | - | - | - | - | - | - | - | - |
| GE28-SX | INA | - | - | - | - | - | - | - | - |
| 4116-AW | INA | - | 12 mm | - | - | 22.3 mm | - | - | - |
| GIHNRK 20 LO | INA | - | - | - | - | - | - | - | - |
| AXS115129 | INA | - | - | 55.00 mm | 95.000 mm | - | - | - | - |
| 20 mm x 35 mm x 20 mm INA GIHNRK 20 LO plain bearings | Mass housing:339 kg; Pa:1800 kN; Appropriate attachment bolt, rec. tightening torque:2280 N·m; H2:115 mm; J6:820 mm; Q120°:2860 kN; P0°:5400 kN; Ca:196 mm; bb:144 mm; Oil seal:TSD 3164 U; Size (mm):20 mm x 35 mm x 20 mm ; |
| 80 mm x 120 mm x 55 mm INA GIR 80 DO-2RS plain bearings | R1:120.65 mm; R2:42.069 mm; Bearing:23044 CCK/W33; Cap bolt:1 1/8-7 UNC; Cap bolt recommended tightening torque:1735.4 N·m; P180°:160 kN; Stabilizing ring:2 x 36053-140; Initial grease fill:1672.65 g; End plug (suffix Y):EPR 23; P60°:416 kN; Size (mm):80 mm x 120 mm x 55 mm ; |
| 32 mm x 52 mm x 32 mm INA GIHN-K 32 LO plain bearings | D:62.0000 mm; Basic Dynamic Radial Load Rating C:15600 N; d:30.000 mm; Basic Static Radial Load Rating Co:4650 N; Grease Speed Rating n1:7500 rpm; B:20.00 mm; Fillet Radius ra:1.00 mm; Size (mm):32 mm x 52 mm x 32 mm ; |
| 60 mm x 120 mm x 17,5 mm INA ZARN60120-TV complex bearings | Accessories:Two Shields; d:10.000 mm; Sealed Speed Rating n3:15000 rpm; Oil Speed Rating n2:26000 rpm; Grease Speed Rating n1:20000 rpm; B:11.00 mm; Grease Speed Rating Open/Shielded n1:20000 rpm; Oil Speed Rating Open/Shielded n2:26000 rpm; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:3400 N; Size (mm):60 mm x 120 mm x 17,5 mm ; |
| 20 mm x 40 mm x 25 mm INA GIKL 20 PW plain bearings | db:110 mm; A:175 mm; Cap bolt, size:M 20x100; End cover:ASNH 522-619 R; H1:125 mm; Ca:80 mm; Oil level, min.:42 mm; P150°:275 kN; P120°:310 kN; Q150°:360 kN; Size (mm):20 mm x 40 mm x 25 mm ; |
| INA GE28-SX plain bearings | Initial grease fill:793.8 g; ba:69.85 mm; R2:33.337 mm; Ca:89.789 mm; Bearing:23038 CCK/W33; Mass pillow block:132 kg; Pa:42.9 kN; P90°:207 kN; H1:169.875 mm; RG:3/4 NPT; |
| INA BF7028 needle roller bearings | d:280.000 mm; Grease Speed Rating Open/Shielded n1:1500 rpm; Basic Dynamic Radial Load Rating C:216000 N; B:46.00 mm; D:380.0000 mm; Sealed Speed Rating n3:950 rpm; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:1800 rpm; Basic Static Radial Load Rating Co:285000 N; Fillet Radius ra:2.00 mm; |
| INA 4460 thrust ball bearings | S:4.763 mm; Ca:101.803 mm; da:174.625 mm; Mass pillow block:223 kg; H2:79.375 mm; PG:1/4 NPT; Bearing limiting speed:2400 r/min; Bearing:22238 CCK/W33; Adapter sleeve assembly:SNW 38x6.7/8; Stabilizing ring:SR-38-32; |
| INA AXS115129 thrust roller bearings | Basic Static Radial Load Rating Co:173000 N; Fillet Radius ra:3.00 mm; Sealed Speed Rating n3:1900 rpm; Accessories:Snap-Ring; Grease Speed Rating Open/Shielded n1:2700 rpm; d:95.000 mm; D:250.0000 mm; B:55.00 mm; Basic Dynamic Radial Load Rating C:203000 N; Oil Speed Rating Open/Shielded n2:3300 rpm; |
| INA 4132-AW thrust ball bearings | Grease Speed Rating n1:3800 rpm; D:110.0000 mm; Sealed Speed Rating n3:3800 rpm; B:38.10 mm; d:60.000 mm; Basic Dynamic Radial Load Rating C:70200 N; Accessories:No Shield, no Seal,; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:58500 N; Oil Speed Rating n2:5000 rpm; |
| INA GE60-SW plain bearings | Oil:1 100 min-1; d:170 mm; Pu:28.480 kN; D1:173 mm; rs (min):1.5 mm; static Cor:897.000 kN; H:55 mm; d1:237 mm; dynamic Cr:300.670 kN; D:240 mm; |
| INA F-204040.1 angular contact ball bearings | Basic dynamic load rating C:16.3 kN; Da max.:89 mm; B:18 mm; Number of balls z:25; Db max.:90.8 mm; Calculation factor e:0.68; Mass bearing:0.42 kg; Reference grease quantity Gref:5.3 cm³; Preload class A GA:150 N; Preload class C GC:870 N; |
| INA KGSNG30-PP-AS linear bearings | Stabilizing ring:SR-20-17; da:85.725 mm; N1:25.4 mm; P90°:81.4 kN; Cap bolt recommended tightening torque:203.4 N·m; h:42.069 mm; PG:1/4 NPT; P180°:55.6 kN; A1:111.125 mm; Housing:SAF 520; |
| 60 mm x 90 mm x 44 mm INA GIHRK 60 DO plain bearings | Mass inner ring:0.005 kg; d:8 mm; F:12 mm; B:10.5 mm; r, r1,2 min.:0.3 mm; Size (mm):60 mm x 90 mm x 44 mm ; |
Axial washer - EGW38E40 - INA/FAG - KRAMP
Part number, EGW38E40. Unit, Each. Specifications, - Little space required for installation. Benefits, - Easy mounting. Properties, - Low-maintenance - Equipped
Thrust washers - EGW38-E40 - medias - Schaeffler
Thrust washers EGW38-E40, thrust washers, maintenance-free, with steel backing. Axial load in one direction Not sealed Lifetime lubrication, freedom from
Axial washer - EGW38E40 - INA/FAG - KRAMP
EGW38E40 Axial washer. INA/FAG. //media.kramp.com/kws/kramps/_8B3bIB3_IzL5SJ8WpoDOs6um2o2. //media.kramp.com/kws/thumb/
Bearing EGW38-E40 (INA) | Size and Specification | Bearings
Plain bearings EGW38-E40. Bearing number : EGW38-E40. Size (mm) : 38x62x1.5. Brand : INA. Bore Diameter (mm) : 38. Outer Diameter (mm) : 62. Width (mm)
Thrust washers EGW38-E40 (Series EGW..-E40)
Thrust washers EGW38-E40 (Series. EGW..-E40) thrust washers, maintenance-free, with steel backing. The datasheet is only an overview of dimensions and
EGW38-E40-Z INA • ABF Store
EGW38-E40-Z INA available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
INA EGW38-E40 plain bearings Video